A family-run British engineering group

Five Specialist Manufacturers. One British Group.

Generators for warships and power stations, air traffic control rooms, piling rigs, honeycomb panels and precision mouldings, all designed and made in the UK.

Or call the group on 01473 830144

Members of the TEX GROUP team, in high-visibility vests and navy overalls, gathered on and around a yellow BSP-TEX JX piling rig in a factory hall
Members of the TEX GROUP team with a BSP-TEX JX piling rig

01The companies

Five Specialists, With a Group Behind Them

Each company keeps its specialist focus, its own name and its own heritage. Behind them stands a family-run group, so a project can draw on more than one of them.

A yellow BSP-TEX JX piling rig on tracks at a gravel site, with its mast lowered and an operator in high-visibility clothing beside it

Roots in 1906Great Blakenham, Suffolk

BSP-TEX

Hydraulic piling hammers, Rapid Impact Compactors, road maintenance machinery, custom trailers and utilities enclosures, designed and made at Great Blakenham.

Notable work A CX piling hammer for the London Eye, and a lightweight, radio-controlled mobile piling rig developed with JCB Greenshields.

  • Hydraulic piling hammers, piling rigs and power packs
  • Rapid Impact Compactors (RIC) for ground improvement
  • Trojan asphalt mixers, Belspray and Wallis emulsion sprayers, Bristowes chip spreaders and Springwood road marking
  • Custom trailers from RM TRAILERS
  • Allied Kiosks & Enclosures for governors, meters, modems, instrumentation and data loggers
Two QK-TEX craftsmen laying honeycomb core into a timber frame on a workbench, with a panel press behind them

Roots in 1965Brigg

QK-TEX

The UK’s No.1 caravan and motorhome interior panel manufacturer. Its timber-based honeycomb sandwich panels give excellent rigidity at minimal weight, with up to 66% weight reduction compared to alternatives.

Notable work Honeycomb panels for the Shared Ground zone in the Millennium Dome, and exhibition panels for HSBC and IBM.

  • Leisure vehicle (RV) panels
  • Lightweight furniture, interior and ceiling panels
  • Retail interiors and signage panels
  • Lightweight exhibition panels
  • Flat, curved, thick or thin, shaped, edged, machined and finished to your specification
Inside a G&M EUROTEX generator enclosure: the diesel engine, exhaust pipework and control panel

Roots in 1938Great Blakenham, Suffolk

G&M EUROTEX

Purpose-built containerised AC generators, designed, manufactured, installed and commissioned, and Lloyd’s accredited marine diesel engine refurbishment, service and spares.

Notable work Generators for Royal Navy Type 45 destroyers, RRS Sir David Attenborough and Hinkley Point power station.

  • Generators for hospitals, data centres, airports and the National Grid
  • Offshore generators and industrial power packs
  • Generators for navy, research and superyacht vessels and workboats
  • Lloyd’s accredited marine diesel service engineering and engine rebuilds
A TEX PLASTICS technician in a cleanroom suit, mask and hairnet packing moulded components at a bright cleanroom bench

Roots in 1977Barnstaple and Derby

TEX PLASTICS

Injection moulded components, from design for manufacture and rapid prototyping to tooling and high-volume production, including cleanroom injection moulding.

Notable work Plastic components for Triumph motorcycles. Winner of the Plastics Industry Awards 2022.

  • Medical and life-critical components
  • Electronics components
  • Building, construction and interiors components
  • Design for manufacture and test, rapid prototyping and tooling
  • Precision and cleanroom injection moulding
  • Post-mould operations, assembly and packing, and JIT, Kanban and consignment stock
Engineers on the walkways of an airport control tower cab, fitting new glazing with a crane under a grey sky

Founded 1996Great Blakenham, Suffolk

TEX ATC

The UK’s leading provider of air traffic control rooms: standard MV8 Series rooms and bespoke designs, control room glazing and high-specification ship windows, designed, manufactured and installed.

Notable work Control room designs for Bangkok International, Manchester Airport, Muscat International and RAF Coningsby.

  • Air traffic control rooms, standard MV8 Series and bespoke
  • Replacement control room glass and control room refurbishment
  • Tex Maxiview and Maxiview Tempest glazing, and Datastop glass
  • Ship windows and wiper systems
  • Engineering services, typically for the main contractor: the cab and operator consoles, not the tower
A TEX ATC ship window in a bolted grey frame, with a solar control blind on one side and a wiper and its motor housing on the other
TEX ATC maritime glazing with a solar control blind and a wiper system

02Case study: TEX ATC

A 290° Field of View Over the Flight Deck

TEX ATC was awarded the contract to design, manufacture and project manage the installation of the flying control room, and all the windows, wipers and blinds, on HMS Queen Elizabeth and HMS Prince of Wales.

The flying control room is cantilevered from the ship. Our team engineered a lost motion system that isolates its glazing from ship movement and hull flex, and gives a 290° field of view over the flight deck.

Also afloat
Windows, wipers and solar control blinds for INS Vikrant, India’s first home-built aircraft carrier
After delivery
Planned and urgent maintenance of the flying control rooms and ship windows

“TEX ATC should be proud of their input into the QEC programme. They worked diligently with flexibility and professionalism to complete and aid the progression of the overall carrier project.”

Bevis JonesHead of Project Procurement, Thales UK

03Track record

Projects by Sector

A selection of work from across the group. Choose a sector to see the projects and the companies behind them.

Land, Sea and Air

Our Engineering Division unites BSP-TEX, G&M EUROTEX and TEX ATC for prime contractors and ministries of defence, from digital design and prototyping to manufacture and through-life support.

Credentials JOSCAR registration, ISO 9001 and Cyber Essentials Plus, among others. Ask for current certificates with your enquiry.

Discuss a Project
  • Generators for Royal Navy Type 45 destroyersG&M EUROTEX
  • A 1000kWe emergency AC generator for a US Navy Expeditionary Transfer Dock vesselG&M EUROTEX
  • Generators for the Royal Australian Navy Cape Class OPV and the Irish Naval ServiceG&M EUROTEX
  • Hydraulic impact compaction equipment for the rapid repair of damaged airfieldsBSP-TEX
  • Airbase equipment container trailers, aircraft support system trailers, test bed and ground loading trailersBSP-TEX
  • Visual control rooms for RAF Coningsby and RAFO ThumraitTEX ATC

Control Rooms for Airports and Airbases

TEX ATC typically works for the main contractor. Its scope is the control room, or cab, and the operator consoles. Most rooms are bespoke; the MV8 Series offers standard modular rooms in two sizes.

Discuss a Project
  • Control room designs for Bangkok International, Manchester Airport, Muscat International and RAF ConingsbyTEX ATC
  • Muscat International: a control room with 100 m² of floor space, on a tower over 97 m highTEX ATC
  • A standard MV8 Series control room for the Oman Aviation Academy’s new tower in SoharTEX ATC
  • A control room at Bagram Airbase, AfghanistanTEX ATC
  • Maxiview Tempest glazing, winner of the BAE Systems Innovation Award for unique control room glassTEX ATC
  • A back-up power system for Heathrow airportG&M EUROTEX

Power and Glazing at Sea

G&M EUROTEX designs marine generators for standby and continuous power on every type of vessel, from military ships to superyachts and workboats, and provides Lloyd’s accredited marine diesel service engineering. TEX ATC adds ship windows and wiper systems.

Discuss a Project
  • Custom generators for the polar research vessel RRS Sir David AttenboroughG&M EUROTEX
  • Generators for Royal Navy Type 45 destroyers and US Navy vesselsG&M EUROTEX
  • Marine diesel engine maintenance programmes for clients including BAE Systems and the Royal NavyG&M EUROTEX
  • Windows, wiper systems and solar control blinds for the QEC aircraft carriers and INS VikrantTEX ATC

Back-Up Power, Built to Order

G&M EUROTEX designs, manufactures, installs and commissions purpose-built containerised AC generators: back-up power for airports, data centres, the National Grid, NHS hospitals and offshore wind farms.

Discuss a Project
  • Generators for Hinkley Point power stationG&M EUROTEX
  • Generators for the National GridG&M EUROTEX
  • Generators for the US OceanWind projectG&M EUROTEX
  • A back-up power system for Heathrow airportG&M EUROTEX
  • Utilities enclosures for governors, meters, modems, instrumentation and data loggersBSP-TEX

Piling, Ground and Highways

BSP-TEX designs and manufactures hydraulic piling hammers, piling rigs, power packs and Rapid Impact Compactors at Great Blakenham, beside the original BSP factory, along with a range of road maintenance machinery.

Discuss a Project
  • A CX piling hammer for the London EyeBSP-TEX
  • A lightweight, radio-controlled mobile piling rig, developed in partnership with JCB GreenshieldsBSP-TEX
  • Rapid Impact Compactors for ground improvementBSP-TEX
  • Road maintenance machinery: Trojan, Belspray, Wallis, Bristowes and SpringwoodBSP-TEX
  • Building, construction and interiors componentsTEX PLASTICS

Light Panels, Precise Mouldings

QK-TEX makes custom honeycomb panels for leisure vehicles, retail, exhibitions and interiors. TEX PLASTICS moulds components for medical, electronics and construction customers, including in cleanrooms.

Discuss a Project
  • Lightweight honeycomb panels for the Shared Ground zone in the Millennium DomeQK-TEX
  • Exhibition panels for HSBC and IBM, and panels for Christie’sQK-TEX
  • Retail display panels for Adidas and Thorntons, and signage panels for TescoQK-TEX
  • Panels for the Westborough Cardboard Building, for Cottrell & Vermeulen ArchitectsQK-TEX
  • Plastic components for Triumph motorcyclesTEX PLASTICS
  • Winner of the Plastics Industry Awards 2022TEX PLASTICS

04Heritage

Five Companies, One Line Back to 1906

Our story begins in 1906, with the British Steel Piling Company, founded by Edward Le Bas. The other four companies were founded, merged or acquired along the way. Here they are, drawn to scale.

Our head office is in Great Blakenham, alongside the original BSP factory and railway.

A sepia photograph of a tall steam piling rig with a boiler and timber leaders, two men in coats and hats standing in front
An early BSP steam piling rig, Great Blakenham, 1920s
  1. BSP-TEX

    1. 1906 Edward Le Bas founds the British Steel Piling Company.
    2. Early 1970s British Steel Corporation takes over the marketing of all UK-produced steel sheet piling, and BSP makes a global impact.
    3. 1989 Acquired by Tex Holdings plc.
  2. G&M EUROTEX

    1. 1938 The Green Ace Motor Company (G&M Power Plant) is incorporated.
    2. 1974 Europax is established. It joins TEX in 1998.
    3. 2015 G&M joins TEX.
    4. 2021 G&M Tex and Eurotex International merge to form G&M EUROTEX.
  3. QK-TEX

    1. 1965 Bert Quinton and Colin Kaines form Quinton & Kaines, with the brand name Quikaboard.
    2. 1987 Joins TEX.
  4. TEX PLASTICS

    1. 1977 AK Precision Mouldings is founded.
    2. 1986 Joins TEX, with two factories in Derby.
    3. 1988 West Country Tooling and West Country Plastics join.
  5. TEX ATC

    1. 1996 TEX ATC is founded.
  6. TEX GROUP LTD

    1. 1946 Incorporated as Tex Abrasives.
    2. 1985 Renamed Tex Holdings plc.
    3. 2021 Renamed TEX GROUP.

05How we work

From Concept to Through-Life Support

A project can start with a concept, a drawing or an existing part that needs to cost less. Here is how our engineering companies take it from there.

  1. The Brief

    Feasibility studies and design for manufacture, or a cost-down review of an existing component.

  2. Design and Analysis

    Concepts become production drawings. Finite element analysis models structural behaviour, load points and stress before anything is made.

  3. Prototype and Test

    Exact prototypes, sent when required to independent third-party test houses for vibration and environmental testing.

  4. Manufacture

    From heavy steel fabrication at Great Blakenham to precision and cleanroom injection moulding.

  5. Install and Commission

    Generators installed and commissioned, control rooms installed, or an MV8 Series kit built under a TEX ATC project manager.

  6. Through-Life Support

    Servicing, spares and refurbishment, including planned and emergency support for legacy naval diesels.

The tall, brightly lit bay of G&M EUROTEX’s fabrication and finishing facility, doors open, with a group of people inside
G&M EUROTEX’s fabrication and finishing facility, Claydon Business Park

Room for Bigger Projects

G&M EUROTEX’s purpose-built fabrication and finishing facility at Unit 20, Claydon Business Park, is shared with BSP-TEX and brings more specialist work in-house. TEX GROUP celebrated its opening in September 2026.

  • 10 tonnesOverhead gantry crane
  • Up to 10 mGenerator enclosures, in length
  • AutomatedWelding, for consistent, repeatable welds
  • BS EN ISO 8501-1:2007Shotblasting, with a dedicated paint area to BS EN ISO 12944

06People and values

Family-Run, Quick to Decide

TEX GROUP is a family-run group of businesses, and the decision-making process is agile and responsive.

We employ people across three divisions (engineering, plastic injection moulding and honeycomb panels) and provide apprenticeships and advanced training.

Careers at TEX GROUP (opens in a new tab)

Our Core Values

  • SafetyWe prioritise safety above all else.
  • QualityWe continuously improve.
  • IntegrityWe are reliable and trustworthy.
  • PeopleWe help build careers and encourage personal growth.
  • TeamworkTogether we make better products.
  • LeadershipWe lead by example.
  • CustomersWe treat our customers how we would like to be treated.
  • CommunicationWe are open and honest.

07FAQ

Questions Buyers Ask

Something else on your mind? Call 01473 830144 or email tex-group@tex.co.uk.

Which TEX company should I talk to?

If you know, choose the company in the enquiry form. If you are not sure, or the work needs more than one company, choose “Not sure yet” and we will share your enquiry with the relevant people in the business. You can also call the group on 01473 830144.

Can you work from our drawings, or design from a concept?

Both. Our engineers turn customer concepts into production drawings. TEX PLASTICS helps with new product designs, tooling transfers and cost-down reviews of existing components, and QK-TEX makes panels to your precise specifications, fully finished or ready for others to work on.

Do you take on subcontract manufacturing for defence contractors?

Yes. The Engineering Division brings together BSP-TEX (including RM TRAILERS), G&M EUROTEX and TEX ATC for specialised equipment trailers, containerised power, control rooms and naval glazing, with finite element analysis, prototypes and, when required, independent third-party testing before full-scale manufacture.

Do you support equipment after it is delivered?

Yes. Through-life support covers planned servicing, emergency repairs and spares for legacy naval vessel diesels, planned and urgent maintenance of aircraft carrier flying control rooms and ship windows, and tailored support and repairs for the other equipment we manufacture.

Where do you manufacture?

In the UK. BSP-TEX, G&M EUROTEX and TEX ATC work from Claydon Business Park at Great Blakenham, near Ipswich, beside the group’s head office. QK-TEX is in Brigg, and TEX PLASTICS has sites in Barnstaple and Derby.

Do you work outside the UK?

Yes. Our work includes control rooms for Bangkok International and Muscat International, windows and wipers for India’s aircraft carrier INS Vikrant, and generators for the US Navy, the Royal Australian Navy and the Irish Naval Service. TEX ATC’s overseas representatives provide local knowledge and resources.

Discuss a project

Tell Us What You Need Made

Send one enquiry to the group. Choose a company if you know which one you need; if not, we will share it with the relevant people in the business.

Your Project Enquiry

All fields are required unless marked optional.

What you need made or supported, quantities and timescales.

We will use your details to reply to your enquiry. Our privacy policy (opens in a new tab) explains how we handle them.