Back-gauge controls & digital readouts · Made in Britain since 1995

Keep the machine.
Upgrade the control.

When the controller on your guillotine, shear or press brake gives up, you don’t need a new machine. We design and build drop-in digital readouts and touch-and-go controls in Tarleton, Lancashire, and support every one of them ourselves.

  • Replaces failed Elgo, Microcut, Gergek and Dexter Lawson MMC‑EL units
  • Reuses your existing AC or DC drive or inverter
  • Support straight from the people who designed it

Touch & Go, in your hand

Key in a size, press GO, and watch the back gauge drive to it.

Simulated display. Real controls are configured to each machine.

1995

Designing industrial controls in Lancashire since

UK

Designed, manufactured and supported in Britain

5

Connections to link a GO‑2 to a typical inverter

RoHS

Compliant electronics, built to last on the shop floor

The problem

The iron lasts decades. The electronics don’t.

A well-built guillotine or shear will cut true for decades. The controller bolted to it rarely lasts that long. Displays fade, keypads stop responding, and the original maker stopped supplying spares years ago.

Replacing the whole machine means a big bill and weeks of disruption. Replacing just the control is far cheaper, far quicker, and your operators get a clearer, more reliable display than the one they started with.

  • The display’s fading or dead

    Missing segments, a dim backlight, or nothing at all when you power up.

  • The gauge drifts or hunts

    Cuts come out of size, or the back gauge overshoots and creeps back.

  • No one sells the parts

    The original controller is obsolete and every repair is a hunt for second-hand boards.

Controllers we’re often asked to replace

Trade names belong to their owners and are used only to describe compatibility.

The controls

Built for the machines you already own.

Three controls, each designed and built by us, for OEM machine builders and for retrofit onto existing machinery.

IC600+ digital readout with its OLED display reading IC600 S.P. Electronics

Digital readout

IC600+ See exactly where the gauge is.

A rugged, full-featured DRO with a high-contrast OLED display you can read in daylight from almost any angle. Supplied as a complete kit with power supply, encoder and cables, it replaces a damaged or faulty original readout. Fit it and forget it.

  • Sheet metal
  • Retrofit
  • OEM
GO-2 touch and go control showing Current Position 500.00 mm above a numeric keypad

Touch & Go positioning

GO‑2 Key in the size. Press GO.

A single-axis positioning control for guillotines, shears, paper cutters, press brakes and drill stops. Fully configurable, it drives a wide range of motors through your existing AC or DC drive or inverter. A typical inverter needs just five connections: direction plus a 0–10 V analogue signal.

  • Retrofit
  • OEM builders
  • Integrators
IC2100 single axis control fitted into the front of a paper guillotine

Guillotine control

IC2100 Built for print finishing.

A single-axis control designed specifically for paper guillotines. It retrofits to almost any guillotine with a leadscrew that can be power driven, in relay or AC inverter versions. A next-generation IC2100 is in development, so ask us about availability.

  • Print finishing
  • Relay or inverter

Encoders, inverters and motors, specified for you

We supply the parts around the control too, matched to your machine. We know the inverters we recommend inside out, so set-up and support stay simple.

Ask for parts
A GO-2 control mounted on the guard of a sheet metal guillotine, showing a cut count and size
A GO‑2 retrofitted to a sheet metal guillotine.

How a retrofit works

From a dead controller to cutting again, in four steps.

  1. Tell us about the machine

    Make, model, what’s fitted now and what’s gone wrong. A photo of the old control helps.

  2. We specify the kit

    Control, encoder and cables, plus an inverter or motor if you need one, configured for your machine.

  3. Fit it your way

    Install it yourself, or through one of our dealers and agents who specialise in your sector.

  4. Talk to the designers

    Questions after install go straight to the people who designed and built your control, here in the UK.

Start with step one

Where you’ll find us

Three industries. One way of working.

  • Sheet metal fabrication

    Guillotines, shears and press brakes, with readouts and back-gauge controls that hold their size.

  • Print finishing

    Paper guillotines and cutters, from the IC2100 to touch-and-go retrofits on older machines.

  • Bulk materials handling

    Control panels for load-cell weighing and filling machines, single and multi-inverter.

  • OEMs and integrators

    Configurable single-axis control for drill stops, positioning axes and special-purpose machines.

Control panels

Control panels, designed and built properly.

We’ve designed and built control panels for hundreds of applications, from simple motor control on a single-phase inverter to multi-inverter panels for load-cell weighing and filling machines.

Send us your drawings and we’ll build to them, or hand us the whole job as a turnkey project. Either way you get quality branded components, tidy wiring and a panel that’s safe, functional and reliable.

  • Build to your drawings
  • Turnkey design and build
  • Inverter drives and motor control
  • Load-cell weighing and filling
Discuss a panel
Inside an SP Electronics control panel: terminal rails, safety relay, contactors, a control board and two inverters
Control panel with two inverters, neatly wired terminals and an isolator

Circuit board repairs

A faulty board on a guillotine, press brake or handling line doesn’t always mean a new control. We repair printed circuit boards for the sheet metal, print finishing and bulk materials handling industries.

Send us the details

For dealers, OEMs and integrators

A manufacturer that picks up the phone.

Numerous machinery dealers have fitted the GO‑2 to replace unreliable, damaged or faulty systems. You get a control you can configure to the machine, kit supplied ready to install, and technical backup from the people who designed it.

  • Fully configurable to the machine, the motor and the drive.
  • Reuse existing drives to keep your installation costs down.
  • Sector specialists in our dealer and agent network.
  • UK manufacture and UK support, start to finish.

Questions

What people ask before a retrofit

Still unsure? The quickest answer is a phone call: 01772 816764.

Can you replace my old Elgo, Microcut or Gergek controller?

Very often, yes. Machinery dealers regularly fit the GO‑2 to replace unreliable, damaged or faulty systems including Elgo, Microcut, Gergek and Dexter Lawson MMC‑EL units. Send us the make and model of your machine and the controller fitted now, and we’ll tell you what’s needed.

Will I need a new motor or inverter?

Not necessarily. The GO‑2 drives a wide range of motors through suitable drive interfaces, so existing AC or DC drives and inverters can often be reused, which keeps installation costs down. If yours is past saving, we can supply a suitable inverter, motor and encoder.

Can we fit it ourselves?

Yes. Many machine builders, dealers and engineers fit our controls themselves. Connecting a GO‑2 to a typical inverter takes five connections: direction plus a 0–10 V analogue signal. If you’d rather not, one of our dealers or agents can install it for you.

What information do you need for a quote?

The machine type, make, model and rough age; the controller fitted now; how the back gauge is driven (AC inverter, DC drive or relays); and a photo of the existing control if you can take one.

Do you work with paper guillotines?

Yes. The IC2100 was designed specifically for print finishing and retrofits to almost any guillotine with a leadscrew that can be power driven. The GO‑2 also suits paper cutting guillotines.

Do you repair circuit boards?

Yes. We repair printed circuit boards for the sheet metal fabrication, print finishing and bulk materials handling industries.

Where are you based?

Tarleton, near Preston in Lancashire. Our products are designed, manufactured and supported in the UK.

Check my machine

Is your machine worth saving? Let’s find out.

Tell us what you’re working with. We’ll come back with a straight answer and what it will take to get you cutting again.

Prefer to talk?

01772 816764
SP Electronics
11 Fulwood Avenue
Tarleton, Preston
Lancashire PR4 6RP
Get directions (opens Google Maps in a new tab)
I am

Your details go straight to the SP Electronics team and are used only to answer your enquiry.