
Ref 2537 Refurbished 2026
MKZD 1060ST Foiling Press
- Sheet1060 x 760mm
- Speed6,500 sheets an hour
- Built2015, fully refurbished 2026 by MKZD
- Warranty12 months parts
Hot foil stamping, embossing, die cutting and creasing. Since 1987.
New and used presses from the names you trust, then the engineers to install, service, move and upgrade them. One Suffolk team, with machines installed or serviced in more than 40 countries.
Prefer to talk? Call 01449 553 400



We buy, sell and service presses from
How we can help
Whatever stage your machine is at, one team handles it. Pick a starting point and we will take it from there.
New YAWA presses and quality used machines from the world’s top makers. Not listed? We are likely to be able to source it.
Find my machine 02Planned servicing and fast repairs, mostly on site. The job is not finished until your press is back in action.
Book a service 03Turn an original Heidelberg into a foiling press, add holograms, or cut foil waste with programmed foil pulls.
Plan an upgrade 04We reach dealers, packaging companies and print finishers, and can service your press before it goes on sale.
Value my machineMachines in stock
A selection from our current stock list. Each machine has its own page with the full specification and photographs.

Ref 2537 Refurbished 2026

Ref 2541 Service record

Ref 2510 Installation available

Ref 2519 In Ipswich
If the press you need is not listed, tell us the make, model or sheet size. We are likely to be able to source it.
Aftersales, worldwide
Our support does not stop when the sale is done. Our engineers look after your press for its whole working life, wherever it is.
Planned servicing to keep productivity up and breakdowns down. Most repairs are done on site, and every one is treated as an emergency.
From a new electrical cabinet to a complete overhaul. Smaller jobs on site, full rebuilds in our workshop, using the best parts available.
Foil Expert, Hologram Expert, heated beds, foil optimisers, unwind kits, delivery chains and electrical upgrades.
Courses tailored to your press and your people, from beginners to experienced foilers. Platens and cylinders, big and small.
Breaking down, relocating and re-commissioning presses, whether it is a few feet across the factory or thousands of miles.
Parts for Bobst, Heidelberg, Johannisberg, MK Masterwork, Polygraph Victoria and YAWA presses, plus bed plates, toggle hooks and health and safety guarding.
Aftersales direct: Richard Ivatt, 01449 553 399
Upgrades and conversions
We specialise in converting original Heidelberg presses into hot foil stamping presses. Our Foil Expert is a foil pull drive that fits neatly onto the original press design, with options for cylinder and platen presses. It is quick to fit, and we fit it when it suits you.



New machines
We are the official UK agents for the full range of YAWA print finishing presses, including their new intelligent automatic folder gluers. You get new-machine value with a UK team to install, train and service it.
Ask about YAWA presses
Automatic hot foil stamping, embossing and die cutting and creasing. 560 x 750mm sheets, up to 2,500 an hour.
New, with 1 year parts warranty
Hand fed platen to foil, emboss, cut and crease. 120 tons of pressure, 2 foil pull units and full safety guarding.
New, with 1 year parts warranty
Moves and installations
Moving premises, or just moving a press to a better spot on the floor? We break it down, bring in the crane operators and logistics firms we trust, re-install it and re-commission it ready for print. You leave the hard part to us.
We can also move other print finishing equipment, including folder gluers and guillotines.
Get a quote for a moveSell your machine
Our engineers can help you sell it. Do not worry about its condition: our Servicing Manager will take a look, or service it before it goes on the market. Then we put it in front of the machine dealers, graphics studios, packaging companies and print finishers on our database.
Or speak to Alan Hutchings on 01449 553 400
About SF Services
SF Services began in 1987 and has grown into an international specialist in new, used and refurbished hot foil stamping, embossing and die cutting and creasing presses. In that time we have installed or serviced machines in more than 40 countries, on every continent.
We have the production knowledge to match: our engineers have spent decades manufacturing, installing and servicing these machines, and our work is performed to the ISO 9001 quality standard and ISO 14001 environmental standard.
Sales
Buying, selling or sourcing a press starts with Alan.
On the new service van that lets him and engineer Aaron Hutchings attend separate jobs (March 2020):
“This then means machine operators will experience much less downtime in the UK which overall is great news for the print finishing industry.”
Servicing Manager, Aftersales
Servicing, repairs and aftersales enquiries go straight to Richard.
Yes. We are the official UK agents for the full YAWA range of print finishing presses, and we always hold a wide variety of used hot foil stamping and die cutting presses from manufacturers including Bobst, Gietz, Heidelberg, Johannisberg, MK Masterwork, Polygraph, Saroglia and SBL.
We are likely to be able to. Tell us the make, model, sheet size or job you have in mind and we will look for it through our contacts across the trade.
Yes. We service and repair all models and sizes of hot foil blocking and cutting and creasing presses. Most work is done on site.
Yes. We have installed or serviced machines in more than 40 countries, and trained operators as far away as Mexico.
Yes. Our Foil Expert is a foil pull drive that fits neatly onto the original press design and converts it into a hot foiling press. There are options for both cylinder and platen presses.
It depends on the machine, and each listing says what it is: from sold as seen, to parts warranties such as 3 months on a Heidelberg GTP or 12 months on a refurbished MKZD 1060ST. New YAWA presses come with 1 year parts warranty.
We do our best to reply within one working day.
Start your enquiry
Buying, servicing, upgrading, moving or selling: a few details and the right person will come back to you. We do our best to reply within one working day.
Make this concept
a reality.
Talk to GRO about bringing
your website to life.