A yellow high reach demolition excavator in DSM livery reaching the top floor of a tower block under a blue sky

Bespoke excavator equipment and modifications, Ipswich

Built to Reach Where Standard Excavators Stop.

High reach demolition rigs, long reach fronts, Teledippers and raised cabs, designed and built in our Ipswich factory for all makes of excavator and supplied worldwide.

Or call sales on 01473 217477

  • Since 1983Manufacturing and modifying excavators
  • 200+Excavators designed and built
  • Up to 70mWorking pin height on telescopic rigs
  • 120t+Largest machines engineered

Recognised by the industry

Five Innovation Awards From the Demolition Industry

Members of the National Federation of Demolition Contractors and the Construction Equipment Association.

  1. 2017Manufacturers’ Innovation Award: Plant & EquipmentWorld Demolition Awards
  2. 2014Manufacturers’ Innovation AwardWorld Demolition Awards, with Kiesel
  3. 2013Innovation AwardDemolition Awards, with Volvo Construction Equipment
  4. 2012Manufacturers’ Innovation AwardWorld Demolition Awards
  5. 2011Innovation AwardDemolition Awards
Five polished award trophies in a row, engraved Demolition Awards 2011, World Demolition Awards 2012, Demolition Awards 2013, World Demolition Awards 2014 and World Demolition Awards 2017
The five trophies, 2011 to 2017

What we build

Front Ends and Conversions, Built Around Your Machine

Every build starts with your base machine and the job it has to do. These are the routes most customers take; anything outside them is what our design team is for.

  • An orange W+S Demolition high reach excavator taking down a large industrial building

    15.5 to 32mworking pin height, 25 to 85t base machines

    High Reach Demolition

    Packages can include straight and bent configurations, the Kocurek Modular Joint, a Rangemaster warning system, and cab and machine protection.

    Specification for high reach demolition
  • A Caterpillar 395 with a tall telescopic demolition boom raised in a works yard

    Up to 70mworking pin height, base machines from 45t

    Telescopic High Reach

    Telescopic demolition booms with one to four sections. The base machine and its specification set the height you can reach.

    Specification for telescopic high reach
  • A yellow DSM demolition excavator working on a partly demolished building

    7,000kgattachment, including head or hitch, on a recent 18m TAB rig

    Heavy Duty Demolition

    Triple Articulating Boom and three-piece high reach rigs for heavier tools at height, on base machines from 65 tonnes.

    Specification for heavy duty demolition
  • A yellow long reach excavator with its arm raised beside a dumper on an earthworks site

    Up to 26.15mdigging reach, 80 to 90t class

    Long Reach

    Booms and dippers in Strenx high-strength steel for machines from 1.5 to 120 tonnes, fitted in Ipswich or shipped as a kit.

    Specification for long reach
  • An excavator fitted with a long telescopic dipper reaching into a deep shaft on a city building site

    Up to 35mdigging depth as standard, 30 to 45t excavators

    Teledipper

    Telescopic dippers for shaft sinking and deep excavation, with the hoist outside the dipper for easy checks. Other depths on request.

    Specification for Teledipper
  • A blue and orange R. Collard demolition excavator with its high reach front raised beside an office block

    As little as 30 minchangeover, two trained fitters, ideal conditions

    Modular Joint

    Swap compatible digging, long reach and demolition fronts on one machine, and keep suitable equipment when you change the machine.

    Specification for Modular Joint
  • A Volvo excavator with its cab raised high on a hydraulic tower outside a factory unit

    About 2mcab lift, in production for over 15 years

    Hydraulically Raised Cab

    Raises your original cab for a clear view of the work, with emergency lowering valves and a cab door safety interlock.

    Specification for hydraulically raised cab
  • A Volvo material handling excavator with a long boom and dipper outside a factory unit

    Bespokebooms and dippers, cabs, counterweight, grabs

    Material Handling

    Swan neck dippers, straight booms, fixed or raised cabs and clamshell or re-handling grabs, specified around what you load.

    Specification for material handling

Demolition configurations

Every Published Height, Drawn to Scale

Pick a base machine class to see every demolition configuration Kocurek publishes for it, from a 13m straight boom to a 61m telescopic rig, with the heaviest tool each one carries.

Base machine class

Telescopic configurations reach working pin heights of up to 70m, set by the base machine and its specification.

35t base machines 7 configurations

  1. 13mStraight Boom3,500kg at 11m outreach
  2. 14mHD TAB3,500kg at 12m outreach
  3. 16mStraight Boom3,500kg at 12m outreach
  4. 17mHD TAB3,500kg at 10m outreach
  5. 18mHRD4,000kg at 13m outreach
  6. 21mHRD4,000kg at 10m outreach
  7. 24mHRD3,000kg at 13m outreach

50t base machines 7 configurations

  1. 14mStraight Boom5,000kg at 12m outreach
  2. 16mHD TAB5,000kg at 13m outreach
  3. 17mStraight Boom5,000kg at 12m outreach
  4. 19mHD TAB5,000kg at 12m outreach
  5. 26mHRD4,000kg at 15m outreach
  6. 30mHRD3,500kg at 16m outreach
  7. 34mTHRD3,000kg at 17m outreach

75t base machines 7 configurations

  1. 15mStraight Boom7,000kg at 13m outreach
  2. 17mHD TAB7,000kg at 12m outreach
  3. 18mStraight Boom7,000kg at 12m outreach
  4. 20mHD TAB7,000kg at 11m outreach
  5. 30mHRD4,000kg at 16m outreach
  6. 35mHRD3,500kg at 18m outreach
  7. 40mTHRD3,000kg at 19m outreach

90t base machines 8 configurations

  1. 17mStraight Boom9,000kg at 14m outreach
  2. 19mHD TAB9,000kg at 14m outreach
  3. 20mStraight Boom9,000kg at 14m outreach
  4. 22mHD TAB9,000kg at 12m outreach
  5. 30mHRD6,000kg at 18m outreach
  6. 35mHRD4,000kg at 22m outreach
  7. 40mTHRD3,500kg at 20m outreach
  8. 50mTHRD3,000kg at 21m outreach

120t base machines 6 configurations

  1. 20mXHD25,000kg at 15m outreach
  2. 21mHD TAB15,000kg at 15m outreach, above ground only
  3. 24mXHD15,000kg at 18m outreach
  4. 30mHD HRD12,000kg at 19m outreach
  5. 36mHD HRD7,000kg at 22m outreach
  6. 61mTHRD 60m3,000kg at 26m outreach on the 10.5m dipper

In Kocurek’s configuration names, HRD is high reach demolition, THRD telescopic high reach demolition and TAB a triple articulating boom; HD and XHD mark heavy-duty builds. Heights are the working pin heights named in Kocurek’s demolition specification sheets; pin height and outreach can depend on the OEM dipper. Tool weights include quick hitch, adapter plate and attachment, and are the heaviest published for each configuration in any conversion tier, at the outreach shown. Limits vary with outreach and conversion: read the specification sheet and confirm suitability for your base machine with Kocurek.

All specification sheets on kocurek.com

Recent builds

Two Recent Conversions, by the Numbers

An orange Hitachi EX1200-7 with a demolition front folded beside further boom sections, under a yellow gantry crane
The Hitachi EX1200-7 conversion

DSM Demolition Ltd

Hitachi EX1200-7: 19 Years On

Kocurek’s original EX1200 conversion, completed in 2007, was still working 19 years later. The new EX1200-7 for DSM Demolition lifts a heavier telescopic tool higher and adds two heavy-duty fronts.

3.5-tonne tool at 65m
Telescopic front, up from 2 tonnes at 61m in 2007
12-tonne tool at 30m
Or 7 tonnes at 36m, on two heavy-duty fronts
Splits for transport
The upper structure separates from the undercarriage
Monitoring built in
Boom pressure, pin positions and slew rotation

Kocurek model DM 120/E. Full Demolition Conversion, Elite Package.

Read the DSM case study
A Caterpillar 395 raised on its own jacking legs while a low loader trailer sits underneath
The CAT 395 on its own jacking legs

PowerTrac Machinery

CAT 395: A 50m Rig That Splits Without a Crane

For PowerTrac Machinery, Kocurek’s official US dealer, a Caterpillar 395 carries a 3.5-tonne tool to 50m, and a 7-tonne tool at 18m on its straight boom for low-level work.

Under 54 tonnes a load
Counterweight removal and rear jacks, no external crane
A bigger footprint
Longer, reinforced track frames and an extending undercarriage
Clear view at height
Tilting cab and a heavy-duty FOPS guard
Simpler changeovers
Modular joint and hydraulic tap couplings

Kocurek model DM 90/E. Full Demolition Conversion, Elite Package and Transport Solution.

Read the PowerTrac case study

In-house engineering

Designed, Cut, Machined and Welded on One Site

Making as much as possible in house is a Kocurek principle, championed by David Kocurek. It keeps control of the details that decide how a machine performs, down to the pins.

  • A Kocurek engineer at a computer, drawing an excavator front in CAD

    Design and Development

    Bring an idea or a drawing. The design team works out the configuration, the supporting modifications and how it will be built.

  • Steel Cutting

    A Kerf RUM 3500GP takes two 14m by 3m sheets, with plasma and oxy-fuel heads cutting 1 to 200mm, depending on process and material.

  • A part held in the chuck of a Haas CNC machine

    CNC Machine Shop

    Five Haas CNC machines, manual lathes and a pin grinding machine, making parts to individual design specifications.

  • A steel pin glowing orange inside the copper coil of the induction hardening machine

    Induction Hardening

    Pins up to 160mm across and 1,500mm long, to a target surface hardness of 58 to 60 HRC and a hardened depth of 3 to 5mm.

  • Machined steel pins and bushes, each marked by hand with its own identification number

    Traceable Pins

    Every hardened pin is hardness tested, with the result recorded against its own identifier.

  • A welder in a helmet at work, sparks lighting the workshop

    Fabrication and Welding

    Booms, dippers and specialist structures made in house, plus repairs to damaged equipment where they are suitable.

Need parts, not a machine? Send drawings, material, thickness and quantities for cutting, machining or hardening. Send us your drawings

How a build works

From First Call to Commissioning

  1. Tell Us the Job

    Base machine make, model and operating weight; the height, reach or depth you need; the attachment and its weight; and any site, access or transport limits.

  2. We Engineer the Whole Machine

    A new front can change counterweight, hydraulics and visibility, so we assess them together before the scope is agreed.

  3. Built in Ipswich, or Shipped as a Kit

    Cut, machined, fabricated and assembled on one site, then fitted at the factory or shipped worldwide as a kit.

  4. Commissioned, Then Supported

    Commissioning and operator familiarisation first, then technical advice whatever the equipment’s age, spare parts and engineers who travel worldwide.

Already run Kocurek equipment? Call 01473 217477, option 2, or email spares@kocurek.co.uk.

Family-run since 1983

A Family Firm Engineering for the Toughest Jobs

David Kocurek and his late mother Rita founded the company in 1983 in plant hire, modifying long reach excavators for their customers. In 1994 work began on a purpose-built factory at Hadleigh Road, Ipswich, and the hire fleet gave way to manufacturing.

The factory has since doubled in size and the site next door has been bought for redevelopment. David and his sister Mary are the directors, nine family members work in the business, and customers are welcome to tour the factory and meet the team.

Ask for a factory tour
Ten members of the Kocurek team in front of a large yellow excavator boom in the factory
  • Portrait of David Kocurek

    David Kocurek

    Director

  • Portrait of Mary King

    Mary King

    Director

  • Portrait of Rebecca Kelly

    Rebecca Kelly

    Head of Sales

  • Portrait of Andrew Flack

    Andrew Flack

    Head of Engineering

  • Portrait of James Calcraft

    James Calcraft

    Production Manager

  • Portrait of Sam Kocurek

    Sam Kocurek

    Management Trainee

Questions

What Buyers Ask Before They Call

What should I include in an enquiry?

Your base machine’s make, model and operating weight; the working height, reach or digging depth you need; the attachment type and weight; what the machine will be doing; and any site, access or transport restrictions. A drawing or a photograph helps if you have one.

Can you work with any make of excavator?

Yes. We work with all makes and models of OEM base machine, from compact specialist builds to machines over 120 tonnes, and assess each proposal for the individual machine and application. Makes we have worked on include Caterpillar, Hitachi, Komatsu, Liugong and Volvo.

What is the difference between high reach and telescopic high reach?

Both are built for demolition at height. Our high reach equipment suits base machines from 25 to 85 tonnes, with working pin heights from 15.5m to 32m. Telescopic high reach booms, with one to four sections, fit base machines from 45 tonnes and reach working pin heights of up to 70m; the base machine and its specification set the height.

Can one excavator switch between digging, long reach and demolition equipment?

Yes, with the Kocurek Modular Joint, which lets compatible standard digging, long reach and high reach demolition fronts be exchanged on the same machine. Two trained and competent fitters can complete a changeover in as little as 30 minutes under ideal conditions; actual times depend on the equipment and the site.

Can I visit the factory?

Yes. The family welcomes customers to tour the factory in Ipswich and meet the team. Mention a tour when you get in touch.

Who do I contact for spare parts or service?

Our after-sales team: call 01473 217477 and choose option 2, or email spares@kocurek.co.uk, with the serial number or a photograph of the equipment if you can. We supply spare parts for Kocurek equipment, including bespoke replacements for older units, and technical advice whatever its age.

Request a quote

Tell Us About the Machine and the Job

Base machine make, model and weight; the height, reach or depth you need; the attachment; any site or transport limits.

We will use your details to reply to your enquiry.

Or Talk to Us Directly