Part of GEMCO, a Nexion group company

Lifts, MOT test lanes and workshop service since 1922

Keep Every Bay Earning

Adding an MOT bay, fitting out a fleet workshop or replacing a tired lift? We plan it around your building, install it with our own engineers and keep it serviced and calibrated for years to come.

Or talk to sales now on 01752 219 111

A car’s front wheels turning on a roller brake tester in a Tecalemit MOT bay, with a Tecalemit lift column behind
Roller brake testing in a Tecalemit MOT bay
  • Since 1922A century fitting out UK workshops
  • DVSA approvedMOT equipment for every class
  • 5-year warrantyAvailable on our MOT packages
  • Our own engineersFactory trained, nationwide

Start here

What Are You Working On?

  • Opening or Upgrading an MOT Bay

    Class 4, 7, 1 and 2, 5L and HGV test lanes. We draw the layout, support your DVSA application and install everything through to sign-off.

    Check if it will fit
  • Equipping a Workshop

    2-post, 4-post, scissor and mobile column lifts, tyre bays, wheel alignment, air conditioning and brake lathes, with much of it shipped from UK stock.

    Browse the range
  • Running a Fleet or CV Workshop

    Heavy-duty lifts up to 44t, mobile columns, CV brake testers, pit jacks and complete ATF test lanes, backed by guaranteed after-sales support.

    See CV equipment (opens in a new tab)
  • Keeping Your Kit Working

    Servicing, calibration, PAT and LEV inspections and spare parts for Tecalemit and other makes, from engineers right across Great Britain.

    Book a service

MOT bay planner

Will It Fit?

Every MOT bay starts with two questions: which vehicles do you want to test, and what will your building allow? Answer both to see the equipment, a typical layout and what a busy bay could take in test fees.

What do you want to test?
What is your building like?

Class 4 MOT bay

Class 4 Bay on a 4-Post Lift

The classic layout for cars and light vans. The lift can be recessed or surface mounted, with play detectors set into the runways for one-person testing.

Illustrative layout, not to scale. Your drawing is produced against DVSA’s current specification.

What Could the Bay Take?

£86,882 a year in test fees, from £1,810 a week over 48 weeks

DVSA’s maximum Class 4 fee is £54.85. An illustration only, before the repair and servicing work that MOTs bring in.

Send Me This Bay Plan

Or talk to an MOT specialist on 01752 219 111

From Empty Unit to First Test

  1. Will It Fit?

    One of our six MOT specialists, based around the UK, measures your building against DVSA’s specification.

  2. Layout Drawing

    We draw your bay in CAD to support your VT01 application, making the most of every metre.

  3. Agreement in Principle

    We guide you through DVSA approval. GT Autos in Ayr had theirs on the first application.

  4. Civils and Install

    We guide the groundwork, recesses included, then our engineers install and commission the lane.

  5. Ready for Sign-Off

    Everything calibrated, connected to DVSA and ready for your test station to be approved.

  6. Looked After

    A service and calibration plan that books your visits for you, so you stay compliant.

The range

Everything Your Workshop Stands On

From a single 2-post lift to a complete commercial vehicle test lane, every product is specified, supplied and supported by the same team. We have invested heavily in UK stock, so much of the range is ready to go.

  • Tecalemit blue 2-post vehicle lift

    Vehicle Lifts

    2-post lifts from 3.0t to 7.0t, Quadra 4-post lifts, space-saving scissor lifts, mobile columns and jacking beams. EV-ready options included.

    View lifts (opens in a new tab)
  • Commercial vehicle test lane with an inspection pit, play detector plates and yellow and black floor markings

    MOT Test Equipment

    DVSA-connected roller brake testers, headlamp beam testers, emissions testers, play detectors and decelerometers for every class of test.

    View MOT equipment (opens in a new tab)
  • Tecalemit wheel balancer with touchscreen display

    Tyre Bays

    Tyre changers from entry level to fully automatic, wheel balancers with measuring and scanning, 4-wheel laser alignment and Haweka accessories.

    View tyre bays (opens in a new tab)
  • Four Tecalemit mobile column lifts raising a large dump truck

    Commercial Vehicles

    Lifts up to 44t, Leviathan mobile columns from 5.5t to 10t each, CV brake testers, pit jacks, tyre changers, balancers and brake lathes.

    View CV equipment (opens in a new tab)
  • Blue oil dispensing and lubrication cabinet

    Workshop Equipment

    Air conditioning service machines, on-car brake lathes, diagnostic tools, bio cleaning and the Lubemaster mobile servicing unit.

    View workshop kit (opens in a new tab)
  • Dimensioned technical drawing of a 4-post lift footprint

    Workshop Design and Build

    Our in-house planners work with your architects on layouts, compressed air, pits, fume extraction, lubrication, waste oil and bodyshops.

    View design services (opens in a new tab)
A car raised on a blue Tecalemit 2-post lift in the Humberside emergency services fleet workshop

Electric and hybrid vehicles

Ready to Lift the EVs Coming Through Your Door

The SF/9235/EVR 2-post lift raises 3.5t in 45 seconds from a low pad height of just 95 mm, and swaps its pads for EV lifting forks with no special tools. Humberside’s police and fire fleet chose it to lift EVs safely.

Capacity
3.5t
Lift time
45 s
Low pad height
95 mm
Read the ESFM story (opens in a new tab)

Case studies

Workshops We’ve Fitted Out

Railway arches, post-war units and purpose-built fleet depots. Every building has its challenges, and our team has usually seen them before.

Blue Tecalemit scissor lift set into the floor of the Autocare MOT bay inside a railway arch

Autocare, Spitalfields, London

Other Suppliers Said It Couldn’t Be Done

Ariful wanted a full MOT test lane in a railway arch near Spitalfields Market. Instead of an expensive pit, our MOT specialist Bernard Gravillis designed an ATL lane around a recessed SF/9094/EV scissor lift that needed only a shallow recess.

  • Agreement in Principle granted
  • No pit excavation
  • Lift, Class 4 brake tester and ancillaries installed
Read the Autocare story (opens in a new tab)
A curtain-sided Wise Group lorry raised on a heavy-duty Tecalemit 4-post lift

Tecalemit has a very strong range of high-quality equipment. For me, what set them apart was the ability to develop a great working relationship with their key people.

Marcin Zajac Managing Director, Wise Group, Kettering. Installed a 16.0t SF/8898/V commercial vehicle lift.
Two Tecalemit service engineers in hi-vis kneeling at a commercial vehicle brake tester recess
All makesnot just ours

Service and calibration

Our Engineers. Your Uptime.

A lift that won’t lift or a brake tester out of calibration costs you work every hour it’s down. Tecalemit is one of the few UK equipment suppliers with its own nationwide team of service engineers, all factory trained and run from our Service Control Centre in Plymouth.

  • Any make, any ageWe service, calibrate and repair other brands of garage equipment too.
  • Calibration to DVSA standardsPre-arranged plans schedule your visits, so nothing slips.
  • Statutory inspectionsPAT and LEV inspections alongside your equipment service.
  • Parts, quicklyA warehouse of parts, with direct access to our factories for anything we don’t hold.

Prefer email? service@tecalemit.co.uk. Spares line 01752 219 110. An admin fee applies to parts orders under £50 excluding VAT.

Our story

A Century in the Workshop

Tecalemit began in 1922, when the Techla and Alemite lubrication brands joined forces. More than a hundred years on, the name still stands for equipment a garage can build a business on.

  1. 1922

    Tecalemit is founded in Paris. The UK business soon follows, with four staff in an office off Regent Street, London.

  2. 1932

    Our Garage Equipment Training School opens, training garage staff and every branch of the armed services.

  3. 1948

    The first production building opens at Marsh Mills, Plymouth. Within ten years the workforce passes 2,500.

  4. 2024

    Tecalemit joins GEMCO, part of the Nexion group alongside brands such as Corghi, Sice and Mondolfo Ferro.

  5. Today

    DVSA-approved MOT equipment, lifts and tyre bays, supplied, installed and serviced across Great Britain from Plymouth.

Accreditation logos: Armed Forces Covenant, CHAS, Constructionline, Garage Equipment Association, ISO 9001 and SafeContractor

ISO 9001 certified, a founder member of the Garage Equipment Association, and accredited with Constructionline, CHAS and Alcumus SafeContractor.

FAQs

Questions Workshops Ask Us

Can’t see yours? Call sales on 01752 219 111 or email sales@tecalemit.co.uk.

Can you fit an MOT bay into my building?

Often, yes, even where others have said no. Our MOT specialists measure your unit against DVSA’s specification, then choose a lift, a recessed scissor lift or a pit to suit your headroom and floor. We’ve built test lanes in railway arches and older post-war units.

Will you help with the DVSA application?

Yes. We produce the equipment layout drawing for your VT01 application and guide you through Agreement in Principle, the civil works, installation and sign-off.

Do you service equipment you didn’t supply?

Yes. Our factory-trained engineers service, calibrate and repair all makes of garage equipment, as needed or on a preventative maintenance contract.

What warranty comes with new equipment?

Up to 5 years on selected equipment, and a comprehensive 5-year warranty is available with our MOT packages.

Can I spread the cost?

Many workshops spread the cost over a 5-year lease purchase. Ask our sales team about it when you request a quote.

How quickly can you deliver?

We hold a large stock in the UK, so much of what you order can be on its way as soon as the order is received. Installation dates depend on the job and any groundwork.

Do you cover my area?

Yes. Our sales specialists and service engineers work across Great Britain, supported by our Service Control Centre in Plymouth.

Do you have lifts for electric vehicles?

Yes. The SF/9235/EVR 2-post lift has EV lifting forks and a 95 mm low pad height, and our team can advise on lifting EVs and hybrids safely.

Get a quote

Tell Us About Your Workshop

Share a few details and the right specialist will come back to you. Prefer to talk now? Call the team directly.

Tecalemit Workshop Equipment
Unit 5 & 6 Tamerton Yard, Tamerton Foliot
Plymouth, Devon PL5 4LD

Best way to reach you

We’ll only use your details to reply to your enquiry. See our privacy policy (opens in a new tab).