Civil and structural engineers in Loughborough, Nottingham and Norwich Designed With
the Builders
in the Room.
Surveys, schemes, approvals and civil and structural design from a consultancy whose directors also run the contractors at Arthur Civil Engineering. Buildability is settled before a design is fixed.

- 2 of 3 directors also run Arthur Civil Engineering, the group’s contractor
- 13 sectors, from farms and food plants to the water industry
- 3 offices: Loughborough, Nottingham and Norwich
Recent work across the group for
- Costain
- Galliford Try
- MWH Treatment
- Jackson Civil Engineering
- Forestry England
Arthur Civil Engineering holds ISO 9001, ISO 14001 and ISO 45001.
What we do
Everything Before the First Dig.
Survey, scheme, approvals and design, the full RIBA plan of work, then construction phase attendance once the ground is open.
-
Survey and Inspection
Facts first, so decisions stand up.
- Topographic surveys, laser scans and drone photogrammetry
- CIRIA 736 containment and EEMUA 159 tank inspections
- CS 450 highway structure inspections
-
Masterplanning and Schemes
From a blank sheet of paper to a tender design.
- Site masterplans and vehicle tracking
- Buildability reviews and budget costs
- Principal Designer under CDM 2015
-
Planning and Building Regs
Applications, negotiations and sign-off.
- Minor and major planning applications
- Domestic, commercial and industrial building regs
- Condition discharge and Environment Agency permits
-
Civil Engineering
Everything at or below ground level.
- Surface, foul and effluent drainage
- Hardstandings, industrial slabs and earthworks
- Lagoon slopes, soakaways and piled foundations
-
Structural Engineering
From the ground up, and below it.
- Steel portal and multi-storey frames
- Reinforced concrete and water-retaining structures
- Justifying and modifying existing structures
-
Sustainability
The UN Sustainable Development Goals as the framework.
- Scheme and life-cycle carbon
- Carbon optioneering
- Support towards net zero
Sectors
How Does Your Site Actually Run?
The first question in all thirteen sectors Arthur works in. Six of them, drawn here with the Arthur line.
-
Agriculture
Grain stores with push walls, yards and lagoons, plus slurry and fuel containment inspected under SAFFO and CIRIA 736.
-
Food Production
“No ledge” details so dust has nowhere to settle, and floors, channels and sumps set out around the process.
-
Manufacturing
No columns in the middle of a production line. Clear spans, crane rails and slabs planned around the kit.
-
Water Industry
Water-retaining tanks, sumps and pits inside sheet piles, for framework contractors and maintenance suppliers alike.
-
Renewables and Energy
Anaerobic digestion, waste to energy and solar: digester bases, bunds, push walls and platforms.
-
Highways
Section 278 packages, estate roads and CS 450 inspections, to the local highway authority’s standards.
Also Commercial, Industrial, Government and MOD, Healthcare, Residential, Marine and Petrochemical.
How a project runs
Survey to Site, Gate by Gate.
Each stage is reviewed before the next one starts, so problems surface on paper, not in the ground.
- 1
Survey
Topo, measured building, laser scan or inspection, so the design starts from facts.
- 2
Scheme
Concept options with buildability, sequencing and budget costs, reviewed and amended.
- 3
Approvals
Planning, building regulations and permits, including the follow-up negotiations.
- 4
Design
Civil and structural design, details and specification for tender and construction.
- 5
On Site
Construction phase attendance, answering questions where the work is happening.
The Arthur group
Design and Site, Without the Silos.
The founders met studying civil engineering at Nottingham Trent in 2007, and built the group so designers and builders work side by side.
- Arthur Consultancy Services Surveys, schemes, approvals and civil and structural design, through a gated process from planning to full construction drawings.
- Arthur Civil Engineering The construction arm: deep drainage, process pipework, pumping stations and reinforced concrete.
- Two of the three directors run the construction company
- Buildability, sequencing and budget costs reviewed at concept stage
- Construction phase attendance, so questions get answered on site
Signed in September 2026 A design-and-build mains sewer connection for the Forestry Commission at High Lodge, Thetford Forest.



Health, safety and the environment
Zero Is the Target.
Two of the four commitments in Arthur’s published policies are measured against zero. The other two: quality on every project, and lower cost on every job.
- 0 Target injuries, and no occupational ill-health
- 0 Target environmental incidents, on the way to net zero
Directors
Three Directors. Both Sides of the Job.
Rich leads the design. Liam and Andy also run Arthur Civil Engineering. Call 01509 648099 to talk to one of them.

-

Rich Simmons
Technical Director, design
Concept and detailed design. Joined in 2021 after five years as a director of a Norfolk consulting engineers.
-

Liam O’Loughlin
Director. Commercial Director, Arthur Civil Engineering
From the water industry: buildability, programming, contracts and quality assurance.
-

Andy Smith
Director. Operations Director, Arthur Civil Engineering
A background in construction works, and a practical knack for taking projects through to completion.
Questions
Asked on Site. Answered Here.
Anything else? Call 01509 648099 or email info@arthurcs.com.
Do you only work in the East Midlands?
No. Arthur has offices in Loughborough, Nottingham and Norwich and works for clients across the UK.
Can you handle planning as well as the engineering?
Yes: minor and major planning applications, condition discharges, Design and Access Statements and building regulations. Architects and fire specialists from Arthur’s network join schemes that need them.
Do you inspect slurry stores and bunds?
Yes. Containment systems are inspected to CIRIA 736, including agricultural stores under the SAFFO regulations, and flat-bottomed tanks to EEMUA 159.
Will you work for a contractor rather than the client?
Yes. Arthur works for clients, contractors and framework teams, on anything from a single domestic beam to multimillion pound schemes.
Can you act as Principal Designer under CDM 2015?
Yes. Principal Designer duties sit alongside design coordination and project management in the scheme development service.
Which software do you design in?
Civil 3D and PDS for civils, Revit for modelling, 3D structural modelling with FE analysis, and BIM Level 2 where a project calls for it.
Talk to a director
Start With the Site.
Send the site, the sector and the stage you’re at. Every enquiry goes to the directors.
- Loughborough and Nottingham 01509 648099
- Norwich 01603 394105
- Email info@arthurcs.com